Ways To Fit The Bathroom Shower Screens Sydney Perfectly To Shower Area
If you are pretty confident in your DIY skill set, then working on fitting out a bathroom shower screen won’t be that tough of a call to consider. It is mandatory that you check in with the experts, who are more than ready to serve you with the steps related to Bathroom Shower Screens Sydney before you can proceed with the options out there. So, waste no time further and get hands-on the best sower screen to match your area. Once you have done that, ask professionals to help you with its installation procedure.
How to fit the bathroom shower screens in the given selected area:
Following some simple steps will help you to get the answer you are looking for. So, get in touch with the points now for a better understanding:
- First mark the wall channel:
At first, the wall channel is noted to be a major piece that helps to hold the shower screen to its place on the wall. Here, you need to first position the wall channel, which is around 10 to 15mm inside of outside edge of the current shower tray. Then with the help of a spirit level, be sure that the channel remains straight. After that, start marking the points on the wall, which are ready for drilling.
- Next stop, drill the holes:
Before moving forward with any drilling, it is vital to check the location of all the electric cables and the nearby pipes first. It is also vital to use the proper drill bit for material that you are drilling as well. Make sure to drill into the wall where you have marked the holes previously. After that, you need to place the wall plugs right into these holes.
- Attaching the channel to a wall:
This is a simple step where the manufacturers use fixing and holes that they have drilled for securing the channel to the wall.
- Fit in the glass panel:
Here, you need to place the bathroom shower screens Sydney into the current wall channel, after it has been placed. Follow the manufacturer’s instructions for the same. In case the glass is heavy, you might need some external help from a second person.
- Go on with the bracing bar:
It is one major element as it helps to provide stability. For that, attach the bar to shower glass using fixings and then extend it across a wall. With spirit level, be sure that the bar is levelled up and then mark through holes in bar and right onto the wall.
- Seal the edges:
As the last step, use sealant gun and sealant for sealing the screen’s edges for that watertight seal. It will prevent any form of moisture escaping. Be sure to leave the sealant for 24 hours to set before using the shower.
The steps are simple and anyone can follow it with ease. So, waste no time and get a hands-on one.