Wooden floors are common today because of their environmental friendliness. But not only environmental friendliness distinguishes wooden floors from others, but also reliability and thermal conductivity.
The most common wooden floors: laminate flooring, parquet, plank floors, and wood-panel floors or OSB. With proper use, timber flooring is the most durable. When starting to install wooden floors, you should pay attention to the humidity in the room, which should not exceed 60%. The temperature in the room should not be lower than +8 degrees.
It is recommended that timber floors be operated in such conditions. Because with increased humidity, the board swells and expands, respectively, warping. At low humidity, cracks dry up and appear. When preparing wood for wooden floors, check for bugs and insects.
There must be ventilation under the floor to prevent mould and mildew. In past times, they made wooden floors and did not arrange ventilation, so there is a lot of mould and an unpleasant smell in such rooms.
When choosing a natural timber floor in a house or apartment, experts recommend focusing not only on personal taste preferences but also on the requirements of the stylistic decision of the room so that the floor surface becomes a worthy continuation of design ideas. Besides, the price of a new coating is also essential, since wood is a relatively expensive solution.
-
What kind of wood should a timber floor be made for a private house?
The surface of the floor is considered the most vulnerable, wearing out faster than the walls and ceiling. A partial solution to this problem will be a competent choice in favour of the most durable and practical wood species. When choosing a timber flooring in a private house, it is recommended to pay special attention to the following parameters:
- Resistance to intense mechanical stress;
- Hygroscopic properties, the ability to absorb moisture from the air;
- High strength, ability to resist the effects of bacteria, parasites, and insects;
- The tendency to decay and rapid destruction of fibres.
The range of wood species used today is vast – from birch and aspen to oak, beech, and exotic varieties, which significantly differ in advantages and practical characteristics. The so-called dendrological features, which collects detailed attributes for each type of wood used today, will help you navigate these indicators.
The length of the timber can be any – the choice of material for this parameter is limited only by the possibilities of coating delivery and the size of the room. If necessary, fragments can be easily cut into pieces of any length, without affecting the aesthetics of the floor and the practical properties of the coating.
Timber flooring can be laid on an existing floor covering – particleboard, plywood, stone tiles, concrete. If the floors in your stake are originally made of wood, the boards can be given a new look: planned, sealed joints.
In any case, the result will be beautiful and easy-care floors. The tree can be ennobled by soaking in stain, staining, or applying patterns on the stencil. You can lay colourful walkways or non-slip mats on the smooth wood floor.
You can find the best timber flooring services in Marrickville, which will make your room more charming and elegant.