The gutter guard installation is essential where it helps to keep the shape of the gutter and make cleaning them less frustrating. They are easy to install, the good news is that you can readily opt for a DIY model that you can quickly install by yourself. When installing your gutter guard keep in mind that no gutter guard negates the need for gutter cleaning completely. However, the best gutter guards reduce the frequency of cleaning and also the time necessary to clean them.
When you install by yourself, you need to consider the price, design, quality and functionality of the materials you buy. Choose the right material for the gutter guard for your roof. Before investing in home improvement through research with questions such as: What type of gutter guard mesh matches your gutter? Who supplies the best quality gutter guard?
Before DIY, ensure that you have all the safety equipment on hand. To install the best gutter guards yourself, secure your ladder and wear a safety harness. The tools are required to cut the metal guard to fit and you need a power drill that helps to complete the installation safer and quicker.
A challenge is that installing gutter guards when you have valleys where these valleys meet at opposing angles. Gutter guard installation in the valley required experience in order to fit and perform well. When doing DIY, the slope of your roof will determine the level of difficulty. If your roof is steeper, the harder and more dangerous it is to install.
Read the instruction before installing gutter guard:
Read your products manual carefully, steps vary by design. Follow the instructions and install your guards correctly. Otherwise, it could cause your gutters to malfunction. If you don’t follow the manufacturer’s installation instructions, you will void your warranty.
Lift your shingles carefully with a knife:
Insert your knife between the shingles and the underlayment, which is the roof’s waterproof barrier. Carefully up the first row of shingles and take care not to damage the shingles when you lift their edges. When placing your guard, if accidentally shingle is cracked then apply roofing cement over the crack.
Slide the guard under the shingles:
In the roofline, align the guard section then insert it under the shingles you have lifted. Until you have reached the end of the first guard section, continue to lift the shingles and slide the best gutter guards.
Mount using self-tapping metal screws:
If your guard system did not come with screws, pre-drill holes with the specified length, then drive the screw into the gutter with a cordless power drill.
Seal the screws with roofing cement:
After the guard installation, dab a small amount of roofing cement over the screw holes, this ensures water will flow into the gutter instead of running through the holes in the lip.
Trim the excess length of the guard:
After the guard installation, use a utility knife to cut a guard section to match the remaining length of gutter.
Wrapping it up:
Choose the best gutter guards materials and colours that will look best on your home. By following these instructions, you can install the gutter guards on your own. Install the right gutter guard that best suits your needs and budget.