Wooden floors need care. Raw wood and timber floors get damaged with time. The floor loses its shine. Wood is also susceptible to scuffs and scratch.
Restoring natural shine is never easy. You have to sand and polish the floor. You can hire floor sanding and polish in Sutherland Shire services.
- Experts will use the right technique that will not damage the floor
- They can help increase the life span of the wooden floor
- They will focus on achieving the lost sheen and gloss
Simple steps are important to follow. You can get started with the DIY task. Later on, you can hire a professional team.
- Test the floor finish:
This refers to the quality of the floor. Before you select any procedure, scrape off a little bit from the plank. You have to study the type of wood used.
Raw wood is common but may need a different technique. Processed wood is easy to treat with the chemical.
- Smudged or clear:
You have to identify is it is clear or smudged finish. If smudged, then avoid performing the DIY task. You have to wax such wooden floors. You can hire floor sanding and polishing in Sutherland Shire services.
For clear types, the safe polish technique is best. You can look around for best floor polish.
- Clean the entire floor:
Before you sand or polish, it is important to clean. Always clear the room off furniture. When cleaning, focus on removing dirt and dust.
You can vacuum or sweep the floor. Mild grade cleaner is best for a wooden floor. Grime may not be easy to treat. Always ensure no residues remain on the floor. You can best use the damp mob to remove water and grime.
- Use quality polish:
Before you use a polish, ensure the floor is dry. Floor sanding and polishing in Sutherland Shire services may use heat technique. This will dry the floor much earlier in time.
Do not apply the polish till the floor is dry. Always begin with polishing from the corner. Use a little amount of polish at a time. The select mob that has a flat surface.
- Mob in the right direction:
Mob direction is important. You have to move the mob in the back and forth direction. Mild pressure is best. Avoid using excess pressure as it can create air bubbles.
Always work out small areas. Taking the entire floor at the same time is not ideal. Expert floor sanding and polishing in Sutherland Shire service will use the machine to polish.
- Coat even:
The polish will offer with the best effect if the coating is even. The uneven coat will create a dull look. Avoid using excess polish to create an extra gloss.
Polish will dry to give that perfect sheen and gloss looks. Ensure you don’t splash the polish on the wet surface. It can leave stains on the floor.
- Restore for a day:
If you hire floor sanding and polishing in Sutherland Shire team they will restore for a day. It is best to leave the polish for 24 hours on the surface.
Once the polish dries out natural you can sand the surface. You get the best result if you are using the polishing machine. Once you polish, the floor will shine for over a year.