Adding a freestanding vanity while constructing a new bathroom or renovating the old bathroom will create a new look in your Newcastle house. The plumbing and storage benefit of the freestanding vanity is similar to traditional vanity. The look of the freestanding vanity will be similar to standalone furniture. In this article let us discuss the installation process of freestanding bathroom vanities in Newcastle and also its benefits.
Freestanding bathroom vanities benefits:
If you have confusion in deciding the bathroom vanity type then the benefits of freestanding vanity will give you a clear idea.
Space: For small size bathroom in Newcastle, freestanding vanity is the best option. It helps to enlarge the sense of space since the floor underneath the vanity is visible without obstruction or blockage.
Custom design: The look of the standalone furniture is mimicked in the freestanding vanity.
Cost: Freestanding vanities are less expensive when compared with the traditional or fully finished vanities. They are portable and prefabricated. So if you are shifting the house then the freestanding vanity can be easily moved.
Versatility: Freestanding vanities are available in different designs, colors, and sizes. So you can choose one based on your taste.
The installation process of a bathroom vanity
Follow the below- mentioned steps for installing a new vanity for the bathroom. Each step must be performed carefully.
Step 1: Water supply must be turned off
When you are installing vanity there are chances for water spraying so use wrenches and pipes to turn off the water supply. You can either shut off the sink valve or water supply of the whole house.
Step 2: Old vanity must be removed
If you are renovating the bathroom then remove the old bathroom vanity before installing the new vanity. Do this step in a section if you have large vanity or if the vanity has tile backsplash in it. If you are planning to discard the old vanity then you can handle it rough. If you are going to reuse the vanity for other purposes then you must do this step very carefully.
Step 3: Check the area
After removing the old vanity check the floor and wall. If it is damaged then hire a contractor to rectify the problem. If needed you can also paint the area.
Step 4: Prepare the vanity
You must do a few things before installing the vanity in its place. If the vanity has back door then cut the door to fix the pipework and if needed trim the vanities leg to fix perfectly.
Step 5: Location
To know the exact location using measuring tape to measure and mark the location using a pencil.
Step 6: Vanity installation
Attach the vanity to the wall using a correct screw. Use long size screws for avoiding the hitting of pipes.
Step 7: New vanity tops
Use 3/8 inch silicone caulk to install the vanity top on the top of the vanity base. If needed you can fix the sides of the vanity top on the wall surface.
Step 8: Fix sink and faucet
After installing the vanity in its place, fix the new sink and faucet. After completing the entire installation call a plumber to do the plumbing work.