The process of fly screen installation in Sydney is rather easy. In fact, you can do it yourself as well. It also needs to be said that this fix-it job is rather satisfying as well. This is especially true when there are lots of openings around your home as such.
Installing the Screens
In most cases, you have small rebates in the moulding of the window frames that are made from timber. It is these rebates that allow the screens to be installed without any difficulty. If you do not have this space you can straight away go ahead and install the screens against the outer surface of your frames.
In case you have sliding or sash windows or ones that open inwards you will find some space for installing cheap fly screens in Sydney on the outside. In case your windows open outwards such as awning and casement windows you would have to fit the screens on the inside. There are some issues with the screens that have to be placed inside. This is in the sense that you have to add mechanical winders. This needs to be done so that you can open the windows without having to remove the screens. In case you have sliding aluminium windows the screens can be fitted on an outer track.
What Do You Need For Such Work?
You need the following to perform fly screen installation:
- Tape Measure
- Plastic Fly Screen
- Aluminium Fly Screen Frame
- Corner Connectors, Four for each screen and Screws to fasten these
- Utility Knife
- Fibreglass Screen Mesh and Toggle Clips So That You Can Hold the Screen in the Frame
- Cordless Drill
In this context, it needs to be mentioned that fibreglass screen mesh is the commonest among all such products in the market. However, you can go for other options if you want as well.
Starting With The Tape Measure
You have to start the process of installing cheap fly screens in Sydney, by using the tape measure to make a careful note of the space that you have within the inside edges in the rebates. After this, you also need to make an allowance of a couple of mm. This in all will give you the size of the screen that you can install on your window. There is a different process that you need to follow if you want to fit the screens into aluminium tracks.
In this case of fly screen installation, the measurement would start on the upper inside surface of the top track. The measurement, in this case, stops at the top edge of the lower track. You can take out 3 mm more from this measurement for tolerance. This way, you would have a screen size that you can fit only by lifting it into the top track and pushing it past the lower track’s edge. After this, you can drop it in the right place.
Do keep in mind that you need to measure all your windows the proper way for such work.